Summary written by USA Jobs 24 from SpaceX's advert and our data on 17,035 current US jobs. How we check every job
At a glance
SpaceX is hiring a Starlink Aviation Production Technician (Entry Level, Temporary) in Woodinville, WA. It is a contract role in Engineering & Manufacturing, asking for at least 1 year of experience, first listed on November 5. The advertised pay is $23–$29 an hour. SpaceX has 149 other openings in the US, 8 of them in Woodinville, WA. Across all employers on USA Jobs 24 there are 3 Engineering & Mfg openings in Woodinville, WA today; the typical one asks for 5 years.
How the pay compares
SpaceX advertises $23 to $29 an hour, a midpoint of $26 an hour. Where an offer lands in a range usually depends on experience and on the exact location. That is lower than about 60% of the 167 engineering & mfg jobs across the US that publish an hourly rate on USA Jobs 24, where the typical midpoint is $27.51 an hour. At 40 hours a week all year, $26 an hour comes to about $54,000 before tax. Convert other hourly rates To see roughly what this leaves after federal and Washington tax, try our take-home pay calculator.
Before you apply
- Check it is still open. We found this job on SpaceX's Greenhouse site on November 5 and checked it again November 5, 5:17 AM ET. When an employer takes a job down, we remove it at our next daily update.
- Check the location works for you. This role is based in Woodinville, WA. If you would need to move, ask whether relocation help is offered.
- Entry-level friendly. The advert is open to people early in their career. Our guide to entry-level jobs covers what to put on a first resume.
- Know your number. Decide the lowest offer you would accept before the first call. Our salary negotiation guide explains how to ask for more.
- Apply only through SpaceX's own site. Our Apply button goes straight to SpaceX's Greenhouse page. If anyone contacts you about this job and asks for money, gift cards or bank details, stop and check it with our scam checker. Read how to spot a fake job offer.
About hiring at SpaceX
SpaceX has 150 openings on USA Jobs 24 today across 7 states. Most are in software & IT (64), operations (30) and engineering & mfg (20). The biggest locations are Hawthorne, CA (35), Brownsville, TX (31) and Bastrop, TX (31). None of them is fully remote, 31% are open to entry-level candidates and 53% show pay. We collect SpaceX's jobs every day straight from its own careers system (Greenhouse), never from job boards or agencies.
The employer's advert
This is SpaceX's own description of the job, copied word for word from its careers site. We have not edited it.
Show the full advert from SpaceXHide the advert673 words
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
STARLINK AVIATION PRODUCTION TECHNICIAN (ENTRY LEVEL, TEMPORARY)
Build, test, and repair Starlink hardware used on aircraft. The Starlink Aviation team makes the systems that connect planes to the Starlink network and support the in-flight experience.
RESPONSIBILITIES:
- Assemble and integrate mechanical and electrical hardware for development units and certification or production test builds, using work instructions
- Install and repair Starlink enterprise and aviation products to FAA, quality, and workmanship standards
- Troubleshoot hardware problems and report findings to engineering or quality so repeat issues get fixed
- Run vibration, shock, thermal, RF, load, and related tests; record and report the data used for FAA certification
- Build hardware to spec and keep product quality consistent
POSITION DETAILS:
This is a TEMPORARY position with SpaceX, for the length of time as stated, and is subject to change with minimal notice as business needs dictate
- LENGTH OF POSITION: 3 Months
- LOCATION: Woodinville, WA
- SHIFT: 1st shift (6:00 AM–4:00 PM) or 2nd shift (4:00 PM–2:00 AM)
BASIC QUALIFICATIONS:
- High school diploma or equivalency certificate
- 6+ months of hands-on experience using hand tools in a job, military role, trade school, or structured training program (screwdriver, ratchet, Allen keys, pliers, or torque wrench)
- Available to work the posted shift: 1st shift (6:00 AM–4:00 PM) or 2nd shift (4:00 PM–2:00 AM), as stated on the requisition
- Able to work overtime and occasional weekends
- Able to lift up to 25 lb unassisted
- Able to stand for long periods, climb ladders, bend, grasp, sit, pull, push, stoop, and stretch
PREFERRED SKILLS AND EXPERIENCE:
- 1+ year in a production, maintenance, repair, lab, or related hands-on setting
- 1+ year fixing, installing, or building aircraft hardware
- Harness fabrication or electro-mechanical assembly
- Printed circuit board assemblies or test stations
- Multimeter experience; oscilloscope, spectrum analyzer, or network analyzer is a plus
- Habit of documenting and correcting nonconformances
-
Aircraft Electronics Technician (AET) or Certified Aircraft Electronics Technician (CAET)
COMPENSATION:
Pay Range:
Level 1: $23.00–$29.00 per hour
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law.
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
USA Jobs 24 copied this listing from SpaceX's official careers site on November 5, 2026 and checked it again November 5, 5:17 AM ET. SpaceX will never ask you to pay to apply or to buy equipment with a check they send you. If anyone does, it is a scam.
Something wrong with this listing? Tell us and we will look into it.
Get engineering & mfg jobs in Washington by email
Similar engineering & mfg jobs in Woodinville, WA
Production Machinist (Starlink) - 2nd Shift - Level 4/5
SpaceX
Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes
- Woodinville, WA
- $38–$45 an hour
NewProduction Machinist (Starlink) - 1st Shift - Level 4/5
SpaceX
Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes
- Woodinville, WA
- $38–$45 an hour
New